Star Trac SPINNER BLADE ION Installation & Owner's Manual page 16

7.
Remove the foam packaging from the rear section of
the bike frame (Fig. 7).
8.
Locate the rear foot strut along with the corresponding
hardware that secures it to the bike frame (Fig. 8).
Hardware:
• M8 x 1.25 x 30mm Hex Head Bolt
• 8mm Split Lock Washer
• 8mm Plain Washer
•
Threaded Foot Plate
9.
Insert the threaded plate (Fig. 9) into the bottom section
of the rear foot bracket.
16 | SPINNER BLADE ION MANUFACTURED by STAR TRAC - OWNER'S MANUAL
Fig. 7
Fig. 8
Fig. 9