Getting Started; Screen Displays - Star Trac SPINNER BLADE ION Installation & Owner's Manual

Getting Started

Screen Displays

Main Screen
Once the bike adjustments are compete, begin riding and the display on the Spinner
generator is powering the computer. There are a total of four data display screens, including the main screen. Each screen has four
lines of display. The Main screen displays data on these lines as follows:
Second Screen
To advance from the main screen to the second display screen, press and release the MODE button. The four lines of data on the
second screen are as follows:
Line 1
Line 2
Line 3
Line 4
Line 1
Line 2
Line 3
Line 4
SPINNER BLADE ION MANUFACTURED by STAR TRAC - OWNER'S MANUAL |
®
Blade ION computer will illuminate as the
LINE 1: Heart rate (displays only when paired to a
compatible Ant+ device)
LINE 2: Cadence in revolutions per minute (RPM)
LINE 3: Power (Watts). The display will show power to
three digits, up to 999. Once the rider reaches
1000 watts, the computer display for power will
flash. The amount of watts shown as a flashing
number indicates the number of watts in excess of
1000 that the rider is generating. For example, the
number 200 flashing on the power display line
indicates that the rider is generating 1,200 watts.
LINE 4: Total calories burned (KCAL). This value is also
equivalent to the amount of kilojoules of energy
generated at the flywheel.
LINE 1: Heart Rate (displays only when paired to a
compatible Ant+ device)
LINE 2: Average Cadence for the stage (RPM)
LINE 3: Average Power for the stage (Watts)
LINE 4: Ride / Stage Time
35