Star Trac SPINNER BLADE ION Installation & Owner's Manual page 13

A
ssembly &
Use the following procedures to unpack and assemble your SPINNER
UNPACKING
Position the shipping carton so the "Heavy End" logo is located at the bottom. Open the top of the carton and fold back all four flaps.
Carefully tilt the box forward so that the box may be lifted to expose the bike. Remove all parts from the shipping carton and foam
inserts, and verify that the following parts are included in your shipment:
Spinner Blade ION Parts List
Description
Main Frame Assembly
Handlebar
Seat and Slider Assembly
Handlebar Post
Lower Seat Post
Front Foot Strut
Pedals and Bolts (set of two; R and L)
Spinner Blade ION Console
Load Sensor Plastic Block Covers Kit
Tool Kit
Take time now to enter your Spinner Blade ION serial number in the space below (serial number is located on the bottom cross
member).
If parts are missing, or if you have any operational questions, please call Star Trac's Service department at (800) 503-1221.
Have your serial number ready.
Serial No._____________________________________________
NOTE: If you are missing any of the parts listed above, inspect the packing material and the box for items that may have been
overlooked.
If parts are missing, or if you have any product questions, please call Star Trac's Service Department at (800) 503-1221, please have
your Spinner's serial number ready.
CAUTION: Damage to the bike during assembly is not covered as part of the limited Star Trac warranty. Take care not to drop or
lean the bike on the handle bar pop-pin. Carefully stand the bike up in the normal upright position on a stable surface so it will not tip
over during assembly.
S
etup
PARTS LIST
AND
SPINNER BLADE ION MANUFACTURED by STAR TRAC - OWNER'S MANUAL |
®
Blade ION manufactured by Star Trac
Qty. Description
1 M8x1.25x30mm Hex Head Bolt
1 8mm Split Lock Washer
1 8mm Plain Washer
1 Threaded Foot Plate
1 Seat Adjustment Pop-Pin
1 "Pull Prevent" Plastic Oval Cap
2 Metal Oval Mounting Plate
1 M5x0.8x25mm Button Head Bolt
1 M5x0.8x12mm Button Head Bolt
1 Multi-Sized Open Wrench
.
Qty.
2
2
2
2
1
1
1
1
1
1
13