Star Trac SPINNER BLADE ION Installation & Owner's Manual page 23

31.
Position the ION console on the top of the handlebar
assembly in-between the water bottle holders. Route
the wire harness (Fig. 31) thru the small oval opening in
the handlebars and plug into the underside of the ION
console.
32.
Seat the ION console (Fig. 32) onto the handlebar and
secure the lower metal plate and plastic covers using a
3mm hex key to tighten the two M5 button head
screws.
NOTE: The long 25mm button head screw is used on
the lower section of the console and the short 12mm
button head screw is used on the upper section of the
console.
SPINNER BLADE ION MANUFACTURED by STAR TRAC - OWNER'S MANUAL |
Fig. 31
Fig. 32
23