Monthly Maintenance; Manager / Maintenance Mode; Manager Mode - Star Trac Fitness S-UBx Owner's Manual

Vacuum the floor under and around the bike. Move the bike to another spot, if necessary, to vacuum thoroughly.
n
Inspect the display panel mounting screws for security, and retighten if necessary.
n
Inspect the display panel keypads for wear.
n

MONTHLY MAINTENANCE

Perform the following services each month, or as needed:
Check that the seat, pedals and shrouds are secure.
n
Tighten the pedals onto their respective pedal cranks using a 5/8-inch open end wrench.
n
M
ANAGER
After using your STAR TRAC S SERIES BIKE for a period of time, you may wish to change some of its settings.

MANAGER MODE

The Manager Settings allow you to query and modify the basic settings of your bike. To enter Manager Settings:
1. Press and hold the
2. A beep will sound and "MANAGER SETTINGS" will scroll once across the P
3. Release all keys. "SN" will display in the P
in the D Window.
ISTANCE
NOTE: The system will automatically exit Manager Settings if no key is pressed for 30 seconds.
The following keys are used to modify MANAGER SETTINGS:
Increase and Decrease Level Keys: Display the next (Increase) and previous (Decrease) parameters. Keys will
repeat if held.
Numeric Keypad: Facilitates entry of the desired value for the displayed parameter. These keys do not save the
new value – see OK Key below.
OK Key: Updates (saves) the value of the displayed parameter in Flash memory. "UPDATING" will scroll once
across the P
show the new value for the parameter.
NOTE: To exit MANAGER SETTINGS without saving any values or settings, press the Q
NOTE: Unless otherwise specified, the Item (parameter) name is shown in the P
shown in the D Window.
ISTANCE
The items that you may display and change with the previous keys are:
Lowest
Item Value
SN 0
DSW 1.0
OHR 0
DST 0
UNx UNE
TIM 5
STAR TRAC S SERIES BIKES O
/ M
AINTENANCE
, and keys together.
ROFILE
Window while the update is in process. When the update is complete, the P
ROFILE
Highest Default
Value Value Meaning
9999 N/A Serial Number. S Series Bike serial number (set by factory).
99.99 N/A Display Software. Display panel software version number (set by factory).
NOTE: Software checksum value is displayed in C
9999 0 Operating Hours. Total operating hours.
9999 0 Distance. Total distance ridden in miles or kilometers, based on current UNx
setting.
UNM UNE Units. UNE (English) = units of pounds, miles, feet, inches
NOTE: Current Value is shown in P
99 99 Time. Maximum time in minutes allowed for a program, excluding warm-up
' M
WNER S ANUAL
M
ODE
ROFILE
Window; the associated numeric value for the parameter will display
ROFILE
UNM (Metric) = units of kilograms, kilometers, centimeters
Window.
ROFILE
S key.
UICK TART
Window, and the value of the parameter is
Window.
ALORIES
Window.
ROFILE
Window will
31