able Of ontents Introduction Manufacturer Warranty Customer Support Safety Instructions Precautions Safeguards Assembly and Setup Assembly Instructions Testing Bike Instructions Seat Adjustment Handlebar Adjustments Pedal Strap Adjustment Resistance Control User Information Bike Setup Training Information Dismounting Bike Why Maintenance Maintenance Moving and Leveling Preventive Maintenance Daily Maintenance...
Rubber Frame Guard, Brass Brake Nut and remaining parts are covered for one (1) year from the date of purchase. An advance warranty replacement kit of wear items is included, consisting of: one (1) Brake Pad and two (2) Pedal Straps. ustomer upport If any items need replacement contact the Star Trac Customer Support Department at 800-503-1221 or 714-669-1660. afety nstructions ®...
WARNING Your Star Trac Spinner Blade Belt Bike is designed for aerobic exercise in a commercial or consumer environment. Please check with your physician prior to beginning any exercise program. Do not push yourself to excess. Stop if you are feeling faint, dizzy, or exhausted. Use common sense when biking.
Page 6
WAARSCHUWING Uw Spinner Blade Belt Bike manufactured by Star Trac is ontworpen voor aërobische oefeningen in een commerciële of gebruiker- somgeving. Zie uw arts vóór het beginnen van een oefenprogramma. Dwing uzelf niet tot buitensporige oefeningen. Stop als u zich duizelig, uitgeput of een flauwte voelt.
Page 7
Abdeckungen zu entfernen oder den bike zu modi- fizieren. ACHTUNG Der Spinner Blade Belt Bike manufactured by Star Trac ist für aerobische Übungen in einer kommerziellen oder Verbraucherumgebung vorgesehen. Bitte holen Sie vor Aufnahme eines jeden Trainingsprogramms den Rat Ihres Arztes ein.
Page 8
ADVERTENCIA Su Spinner Blade Belt Bike manufactured by Star Trac está diseñado para el ejercicio aerobic en un ambiente commercial o de consume. Por favor consulte con su médico antes de iniciar cualquier programma de ejercicio.
Page 9
Bike. VARNINGAR Spinner Blade Belt Bike manufactured by Star Trac är avsedd för aerobisk träning i kommersiella eller konsumentinriktade miljöer. Konsultera din läkare innan du inleder något träningsprogram. Driv inte dig själv för hårt. Sluta om du känner dig yr, svimfärdig eller utmattad. Använd bike med sunt förnuft.
Page 10
® Spinner Blade Belt Bike manufactured by Star Trac Spinner bike bike bike bike Spinner Blade Belt Bike manufactured by Star Trac | SPINNER BLADE BELT BIKE MANUFACTURED by STAR TRAC - OWNER’S MANUAL...
Page 11
® Spinner Blade Belt Bike manufactured by Star Trac bike bike bike bike bike bike bike Spinner Blade Belt Bike manufactured by Star Trac bike SPINNER BLADE BELT BIKE MANUFACTURED by STAR TRAC - OWNER’S MANUAL |...
If your foot does become disengaged, push down on the resistance knob to stop the flywheel’s motion. | SPINNER BLADE BELT BIKE MANUFACTURED by STAR TRAC - OWNER’S MANUAL...
CAUTION: Damage to the bike during assembly is not covered as part of the limited Star Trac warranty. Take care not to drop or lean the bike on the handle bar pop-pin. Carefully stand the bike up in the normal upright position on a stable surface so it will not tip over during assembly.
(Fig. 1). Fig. 1 Return the opened box back to the upright position (Fig. 2). Fig. 2 Expose the packaged bike by pulling the box up (Fig.3). Fig. 3 | SPINNER BLADE BELT BIKE MANUFACTURED by STAR TRAC - OWNER’S MANUAL...
Page 15
Tilt the packaged Spinner frame towards the heavy flywheel end (Fig. 6) and remove the following: front foot assembly, pedal set, & the rear foot assembly from their packaged location. Fig 6. SPINNER BLADE BELT BIKE MANUFACTURED by STAR TRAC - OWNER’S MANUAL |...
Page 16
8mm Plain Washer Threaded Two Hole Bar Fig. 8 Insert the threaded bar (Fig. 9) into each slot at the bottom section of the rear foot bracket. Fig. 9 | SPINNER BLADE BELT BIKE MANUFACTURED by STAR TRAC - OWNER’S MANUAL...
Page 17
(Fig. 11). Fig. 11 Split and remove (Fig. 12) the foam covering the front of the Spinner frame. Fig. 12 SPINNER BLADE BELT BIKE MANUFACTURED by STAR TRAC - OWNER’S MANUAL |...
Page 18
Install the front foot assembly (Fig. 15) and tighten the hardware using the supplied multi-sized open wrench. Note: These bolts must be torque between 35-40 Lb-Ft (47-54 Nm). Fig. 15 | SPINNER BLADE BELT BIKE MANUFACTURED by STAR TRAC - OWNER’S MANUAL...
Page 19
Spinner frame (Fig. 17). Fig. 17 Locate and install the seat height adjustment pop pin onto the Spinner frame (Fig. 18) using the supplied multi-sized open wrench. Fig. 18 SPINNER BLADE BELT BIKE MANUFACTURED by STAR TRAC - OWNER’S MANUAL |...
Page 20
Insert and drive the handle bar post to the lowest possible position inside the Spinner frame (Fig. 21) by pulling on the “T” style pull pin located above the front SPIN badge. Fig. 21 | SPINNER BLADE BELT BIKE MANUFACTURED by STAR TRAC - OWNER’S MANUAL...
Page 21
Fig. 23 Reinstall the stop bolt onto the handle bar slider (Fig. 24) using a 4mm hex key. Fig. 24 SPINNER BLADE BELT BIKE MANUFACTURED by STAR TRAC - OWNER’S MANUAL |...
Page 22
Fig. 26 Using a rubber mallet (Fig. 27); tap the center of each pedal with medium force to lock the pedals in place. Fig. 27 | SPINNER BLADE BELT BIKE MANUFACTURED by STAR TRAC - OWNER’S MANUAL...
Page 23
Install the pedal securing bolts (Fig. 28) into each pedal thru the back of each crank arm using an 8mm hex key. Note: These bolts must be torqued between 33-37 Lb-Ft (45-50 Nm). Fig. 28 SPINNER BLADE BELT BIKE MANUFACTURED by STAR TRAC - OWNER’S MANUAL |...
When the testing is complete tip the bike forward using the handlebars and roll it on a smooth surface to the final location and adjust the leveling feet so the bike is stable. | SPINNER BLADE BELT BIKE MANUFACTURED by STAR TRAC - OWNER’S MANUAL...
Dismount the bike. Loosen the seat fore-and-aft tension knob by turning the knob counterclockwise. Move the seat forward or back to the desired position and then tighten the tension knob by turning clockwise. SPINNER BLADE BELT BIKE MANUFACTURED by STAR TRAC - OWNER’S MANUAL |...
The front of the shoe may not completely fill the toe cage. Note: The pedal straps should be adjusted to hold the foot snugly in the pedal. Pedal Tightening Clip | SPINNER BLADE BELT BIKE MANUFACTURED by STAR TRAC - OWNER’S MANUAL...
NOTE: In case of emergency, you may press directly down on the Push Brake System knob to bring the flywheel to an abrupt stop. ® Spinner Blade Belt Bike Resistance Knob SPINNER BLADE BELT BIKE MANUFACTURED by STAR TRAC - OWNER’S MANUAL |...
Make sure that all pop pins are engaged and secure after adjusting your bike WARNING IN CASE OF EMERGENCY YOU MAY PRESS DIRECTLY DOWN ON THE PUSH BRAKE SYSTEM KNOB TO BRING THE FLYWHEEL TO AN ABRUPT STOP. | SPINNER BLADE BELT BIKE MANUFACTURED by STAR TRAC - OWNER’S MANUAL...
• Increase the resistance by turning the Push Brake System knob clockwise (+) until the pedals come to a complete stop. • Push down on the Push Brake System knob until the pedals come to a complete stop. SPINNER BLADE BELT BIKE MANUFACTURED by STAR TRAC - OWNER’S MANUAL |...
Working on this product will require basic and/or sometimes specialty tools based on the type of service that will be performed at any time. To assist, Star Trac recommends having the tools listed (Fig. 1) available when performing maintenance. Tool...
NOTE: Release all tension from the resistance knob after each use to allow for perspiration to evaporate. If bikes are used in a class setting, the instructor may direct class participants to release all tension for the resistance knob after each use. SPINNER BLADE BELT BIKE MANUFACTURED by STAR TRAC - OWNER’S MANUAL |...
• Inspect pedals for play. Excessive movement of pedals indicates replacement is required. • Tighten seat hardware. • Tighten pedal toe clip / toe straps. • Inspect and tighten tension knob assembly. • Leveling feet. | SPINNER BLADE BELT BIKE MANUFACTURED by STAR TRAC - OWNER’S MANUAL...
DO NOT USE ANY LUBRICATION ON THE BIKES BELT DRIVE TRAIN. THE USE OF LUBRICATION ON THE BIKES BELT DRIVE TRAIN WILL DRAMATICALLY AFFECT THE FUNCTION OF THE BIKE AND VOID THE BIKES WARRANTY. SPINNER BLADE BELT BIKE MANUFACTURED by STAR TRAC - OWNER’S MANUAL |...
• When alignment is at the optimal adjustment, the belt will run smoother and quieter. Tighten the adjustment lock nuts and axle nuts on both sides. 10. Install the belt guard shroud and re-test the bike. | SPINNER BLADE BELT BIKE MANUFACTURED by STAR TRAC - OWNER’S MANUAL...
Page 35
SPINNER BLADE BELT BIKE MANUFACTURED by STAR TRAC - OWNER’S MANUAL |...
Page 36
STAR TRAC 4400 NE 77 Avenue, Suite 300 Vancouver, WA 98662 Telephone: (800) 228-6635, (714) 669-1660 Fax: (714) 508-3303 http://www.startrac.com Document Number 620-8263A | SPINNER BLADE BELT BIKE MANUFACTURED by STAR TRAC - OWNER’S MANUAL...