Star Trac SPINNER BLADE ION Installation & Owner's Manual page 19

17.
Locate adjustable seat post and insert into the seat
tube on the bike frame (Fig. 17).
18.
Locate and install the seat height adjustment pop pin
onto the bike frame (Fig. 19). Use the multi sized open
wrench to tighten.
19.
Attach the seat slider assembly onto the seat post by
pulling the small pull pin located at the underside of the
seat post and sliding into position (Fig. 18).
®
20.
Locate the Spin badge (Fig. 20) at the front of the bike
frame.
SPINNER BLADE ION MANUFACTURED by STAR TRAC - OWNER'S MANUAL |
Fig. 17
Fig. 19
Fig. 18
Fig. 20
19