Escape Sequences (Cont.)
Sequence Panel Information
$LC
$LP
$BX
$BY
$BN
For instance, http://www.amx.com/img.asp?device=$DV
would become
http://www.amx.com/img.asp?device=10001.
Intercom Commands
The following is a listing and descriptions of panel intercom commands.
Intercom Commands
^ICE
Ends an
intercom call.
^ICM
Modifies an
intercom call.
MVP-8400i 8.4" Modero® ViewPoint® Touch Panel with Intercom
Level code
Level port
X Resolution of Current button
Y Resolution of Current button
Name of Button
Syntax:
"'^ICE'"
Example:
SEND_COMMAND Panel,"'^ICE'"
Ends a call.
For backwards compatibility, both ^ICM-TALK and ^ICM-LISTEN are supported. In this
release, however, the TALK and LISTEN subcommands are ignored. The microphone
and/or speaker are activated based on the initial mode value of the intercom start
command and the audio data packet flow is started upon receipt of this command by the
panel.
Syntax:
SEND_COMMAND <DEV>,"`^ICM-TALK`"
Variables:
None.
Example:
SEND_COMMAND TP1,"`^ICM-TALK`"
Programming
167