Cfsm; Cex; Dld; Icm-Talk - AMX Modero ViewPoint MVP-8400i Operation/Reference Manual

Programming
Panel Setup Commands (Cont.)

^CFSM

Sets the Flash cache to
the maximum 
available size allowed
for backup Flash cache.
(determined by taking
75% of free Flash
space)

^CEX

Changes the default
expiration time for
entries in the image
cache (applies to both
primary RAM cache and
backup Flash cache).
The default 
expiration time applies
to dynamic images only.

^DLD

Set the disable cradle
LED flag.

^ICM-TALK

^ICM-LISTEN

Intercom modify 
command.

^ICM-MUTEMIC

Set the state of the
microphone on a panel
to muted (1) or unmuted
(0). At the start of each
call the microphone
starts out unmuted.
162
Syntax:
"'^CFSM'"
Variable:
There is no parameter for this command.
Example:
SEND_COMMAND Panel, "'^CFSM'"
Modifies the Flash cache size to the maximum available size for the device.
Syntax:
"'^CEX-<time index>'"
Variable:
time index:
• 1 = 2 Hours
• 2 = 8 Hours
• 3 = 1 Day
• 4 = 2 Days
• 5 = 5 Days
• 0 = NEVER
Example:
SEND_COMMAND Panel, "'^CEX-4'"
Changes the default expiration time to 2 Days.
Syntax:
"'^DLD-<0/1>'"
Variables:
0 - LEDs operate normally
1 - Cradle LEDs operate dim setting only
Example:
SEND_COMMAND Panel, "'^DLD-1'"
Sets the cradle LEDs to the dim setting.
Intercom modify command. For backwards compatibility both versions are sup-
ported.
In this release, however, the TALK and LISTEN subcommands are ignored. The 
microphone and/or speaker are activated based on the initial mode value of the
intercom start command and the audio data packet flow is started upon receipt of
this command by the panel.
Syntax:
SEND_COMMAND <DEV>,"'^ICM-TALK'"
Variables:
None.
Example:
SEND_COMMAND TP1,"'^ICM-TALK'"
Syntax:
"'^ICM-MUTEMIC,<state>'"
Variables:
0 - unmuted
1 - muted
Example:
SEND_COMMAND Panel, "^ICM-MUTEMIC,1"
Sets the microphone to muted.
MVP-8400i 8.4" Modero® ViewPoint® Touch Panel with Intercom