AMX Modero ViewPoint MVP-8400i Operation/Reference Manual page 180

Programming
^RAF, ^RMF - Embedded Codes (Cont.)
Parameter Embedded Code
file
path
refresh
newest
preserve
Escape Sequences
The ^RAF and ^RMF commands support the replacement of any special escape sequences in the filename
(specified by the %F embedded code) with the corresponding data obtained from the system as outlined in the
table below:
Escape Sequences
Sequence Panel Information
$DV
$SY
$IP
$HN
$MC
$ID
$PX
$PY
$ST
$AC
$AP
$CC
$CP
166
'%F <file>'
'%A <path>'
'%R <refresh 1-65535>'
'%N <0-1>'
'%V <0-1>'
Device Number
System Number
IP Address
Host Name
Mac Address
Neuron ID (Only supported on panels that use ICSNet; ignored on all other panels)
X resolution of current panel mode/file
Y resolution of current panel mode/file
Current state
Address code
Address port
Channel code
Channel port
MVP-8400i 8.4" Modero® ViewPoint® Touch Panel with Intercom
Description
Full path to the location of the file or program that will return
the resource. The path must be a valid HTTP URL minus the
protocol and host.
The only exception to this is the inclusion of special escape
sequences and in the case of FTP protocol, regular expres-
sions.
Set Directory path. The path must be a valid HTTP URL minus
the protocol, host and filename.
The only exception to this is the inclusion of special escape
sequences and in the case of FTP protocol, regular expres-
sions.
The number of seconds between refreshes in which the
resource is downloaded again. Refreshing a resource causes
the button displaying that resource to refresh also.
The default value is 0 (only download the resource once).
Set the newest file. A value of 1 means that only the most
recent file matching the pattern is downloaded.
Note: The 'newest file' option only applies to FTP Dynamic
Images, and only those that have pattern matching as part of
their filename. Neither 'newest file' nor pattern matching apply
to HTTP Dynamic Images.
When set, the panel will first pull a list of files matching the
given pattern from the specified FTP server and path. The
timestamps of the items in the list will be compared, with the
newest one being displayed on the panel. This is useful for
source devices that place a uniquely named still image in a
folder at constant intervals, allowing the panel always to
display the most recent one.
Set the value of the preserve flag.
Default is 0. Currently preserve has no function.
