AMX Modero ViewPoint MVP-8400i Operation/Reference Manual page 73

Battery Settings Page (Cont.)
Low Battery Warning:
Very Low Battery Warning: The UP/DN buttons adjust the time value (in minutes) available on the battery
Combined Charge Status
Battery One Charge Status Indicates the power charge available on the Slot 1 battery in the panel. This bar
Battery Two Charge Status Indicates the power charge available on the Slot 2 battery (in the panel). This
Battery Dock 1 Charge 
Status
Battery Dock 2 Charge 
Status
Docking Station Version
Battery Level Port
Battery Level
MVP-8400i 8.4" Modero® ViewPoint® Touch Panel with Intercom
The UP/DN buttons adjust the time value (in minutes) available on the battery
(for use) before the panel displays a low battery warning.
Range - 10, 15, 20, 30, 45 default = 15 min.
Note: This field applies to MVP-BP batteries installed in the panel.
before the panel displays a very low battery warning (indicating near-term panel
shutdown).
• Range = 3, 5, 7, 10 default = 5 min.
• This value cannot exceed the Low Battery Warning value.
Note: This field applies to MVP-BP batteries installed in the panel.
Indicates the combined power charge available from batteries installed in the
panel. This bar is light blue when connected to a power source, and turns
orange and displays the current charge when the panel is running on battery
power.
is light blue when connected to a power source, and turns orange and displays
the current charge when the panel is running on battery power.
bar is light blue when connected to a power source, and turns orange and dis-
plays the current charge when the panel is running on battery power. If the
panel does not have a Slot 2 battery, this bar will be dark blue, and will turn dark
orange when the panel is disconnected from a power source.
Indicates the power charge available on the docking station's battery #1.
Indicates the power charge available on the docking station's battery #2.
Note: If no batteries are being charged within the docking station's battery
compartments, or the MVP is not connected to a docking station; both Battery
Dock Charge Status fields are left blank.
Indicates the firmware version currently installed on the docking station.
Indicates the port being used to report charge status levels back to the NetLinx
Master (set in TPDesign4).
Indicates the level being used to report status levels back to the NetLinx Master
(set in TPDesign4).
Setup Pages

59