AMX Modero ViewPoint MVP-8400i Operation/Reference Manual page 104

Setup Pages
SIP Settings Page (Cont.)
Status:
Connection State:
Proxy Address:
Port Number:
STUN Address:
Local Domain:
User Name:
Password:
90
This option enables the SIP Stack on startup. If you disable this option, the
panel will not attempt to read the rest of the configuration and will not register
with a proxy server. However, point-to-point SIP will still be enabled allowing for
existing intercom functionality.
This option displays whether you are connected to the proxy server.
This option enables you to enter the IP address or DNS name of the proxy
server that you want to use to register.
The option displays the port you use to connect to the proxy server. The
standard SIP port is 5060, but some providers use different ports.
This option enables you to enter the IP address or DNS name of the Simple
Traversal of UDP through NATs (STUN) server. This field is optional.
This is the realm used for authentication. This field is optional.
This option enables you to enter the user name used for authentication to the
proxy server. The user name must match an extension defined in the SIP
Gateway to "register" the panel so it can receive calls. Normally, the user name
is the same as the phone number assigned to the extension you are using. This
field is required.
This option enables you to enter the password for the user at the proxy server.
This field is optional.
MVP-8400i 8.4" Modero® ViewPoint® Touch Panel with Intercom