Mps; Vks - AMX Modero ViewPoint MVP-8400i Operation/Reference Manual

Input Commands (Cont.)

^MPS

Set mouse pass
through. Allows
mouse input to
multiple 
destinations
simultaneously.
Destinations are
comma delimited.

^VKS

Send one or more
virtual key strokes
to the G4 
application.
MVP-8400i 8.4" Modero® ViewPoint® Touch Panel with Intercom
Note: This command causes all mice connected to the G4 product and any mice on a
computer connected via a VGA card with USB output to reset to position 0,0.
Syntax:
"'^MPS-<0-6>,<0-6>,...'"
Variable:
0 = Pass mouse input to G4 application.
1-4 = Pass mouse input data to a VGA card with USP output for redirection to a
computer.
5 = Pass mouse buttons to the NetLinx master in the form of a custom event.
6 = Pass mouse buttons and movement to the NetLinx master in the form of custom
events.
Example:
SEND COMMAND Panel,"'^MPS-0'"
Passes the mouse input to a connected G4 application.
Key presses and key releases are not distinguished except in the case of CTRL, ALT, and
SHIFT.
Refer to theEmbedded Codes table on page 161 that define special characters which
can be included with the string but may not be represented by the ASCII character set.
Syntax:
"'^VKS-<string>'"
Variable:
string = Only 1 string per command/only one stroke per command.
Example:
SEND COMMAND Panel,"'^VKS-'8"
Sends out the keystroke 'backspace' to the G4 application.
Programming
159