AMX Modero ViewPoint MVP-8400i Operation/Reference Manual page 102

Setup Pages
Password Settings Page (Cont.)
User Access:
88
Use these buttons to access and modify the user name/password combinations
required for removing the panel from a docking station. The number of user
access passwords on the panel is limited only by the amount of storage
memory available.
Use the UP/DN buttons to scroll through the list of saved User Access user
names and passwords.
The Enable/Enabled button allows you to toggle between activating or
deactivating the MVP panel requirement of a user to enter a pre-defined
password before removing the panel from a connected docking station:
• Enable - does not prompt the user for a password, the docking station just
releases the panel when the security release pushbutton is pressed.
• Enabled - requires that a valid password from the User Access list be entered
before removing a panel from a docking station.
• The Report button enables/disables reporting the panel's docking status to
the Master.
MVP-8400i 8.4" Modero® ViewPoint® Touch Panel with Intercom