Factory Reset - D-Link DGS-3312SR Release 3.5 Manual

DGS-3312SR Stackable Gigabit Layer 3 Switch

Factory Reset

The Factory Reset function has several options when resetting the Switch. Some of the current configuration parameters
can be retained while resetting all other configuration parameters to their factory defaults.
Please note that the Reset System option will enter the factory default parameters into the Switch's non-volatile RAM, and
then restart the Switch. All other options enter the factory defaults into the current configuration, but do not save this
configuration. Reset System will return the Switch's configuration to the state it was when it left the factory.
Reset gives the option of retaining the Switch's User Accounts and History Log while resetting all other configuration
parameters to their factory defaults. If the Switch is reset with this option enabled, and Save Changes is not executed, the
Switch will return to the last saved configuration when rebooted.
The Reset Config option will reset all of the Switch's configuration parameters to their factory defaults, without saving
these default values to the Switch's non-volatile RAM. If the Switch is reset with this option enabled, and Save Changes is
not executed, the Switch will return to the last saved configuration when rebooted.
In addition, the Reset System option is added to reset all configuration parameters to their factory defaults, save these
parameters to the Switch's non-volatile RAM, and then restart the Switch. This option is equivalent to Reset Config
(above) followed by Save Changes.
Figure 9- 7. Factory Reset to Default Value window
237