D-Link DGS-3312SR Release 3.5 Manual page 86

Click Apply to implement changes made.
To configure the parameters for a previously set MSTI, click on its hyperlinked MSTI ID number, which will reveal the
following screen for configuration.
The user may configure the following parameters for a MSTI on the Switch.
Parameter
MSTI ID
Type
VID List (1-4094)
Click Apply to implement changes made.
DGS-3312SR Stackable Gigabit Layer 3 Switch
Figure 4- 38. Instance ID Settings window - Modify
Description
Displays the MSTI ID previously set by the user.
This field allows the user to choose a desired method for altering the MSTI settings.
The user has 2 choices.
Add VID - Select this parameter to add VIDs to the MSTI ID, in conjunction
•
with the VID List parameter.
Remove VID - Select this parameter to remove VIDs from the MSTI ID, in
•
conjunction with the VID List parameter.
This field is used to specify the VID range from configured VLANs set on the Switch
that the user wishes to add to this MSTI ID. Supported VIDs on the Switch range from
ID number 1 to 4094. This parameter can only be utilized if the Type chosen is Add or
Remove.
73