D-Link DGS-3312SR Release 3.5 Manual page 120

The user may set the Access Profile Table window on a per-port basis by entering a port
Port
number in this field. Entering "all" will denote all ports on the Switch.
To establish the rule for a previously created Access Profile, select the Access Profile entry from the Access Profile Table
window and then click the Modify button for that individual entry.
To create a new rule set for the access profile, click the Add button. A new window is displayed. To remove a previously
created rule, select it and click the Delete button.
Configure the Access Rule Configuration settings for Ethernet on the window below.
The following parameters can be set:
Parameter
Profile ID
Mode
Access ID
DGS-3312SR Stackable Gigabit Layer 3 Switch
Figure 4- 76. Access Rule Table window
Figure 4- 77. Access Rule Configuration (Ethernet) window
Description
This is the identifier number for this profile set.
Select Permit to specify that the packets that match the access profile are forwarded
by the Switch, according to any additional rule added (see below).
Select Deny to specify that packets that do not match the access profile are not
forwarded by the Switch and will be filtered.
Type in a unique identifier number for this access. This value can be set from 1 to
255.
107