Local Enable Password - D-Link DGS-3312SR Release 3.5 Manual

Local Enable Password

This window will configure the locally enabled password for Enable Admin. When a user chooses the Local_Enable
method to promote user level privileges to administrator privileges, he or she will be prompted to enter the password
configured here that is locally set on the Switch.
To view the following window, click Security > Access Authentication Control > Local Enable Password:
To set the Local Enable Password, set the following parameters and click Apply.
Parameter
Old Local Enable
New Local Enable
Confirm Local
Enable
DGS-3312SR Stackable Gigabit Layer 3 Switch
Figure 4- 82. Configure Local Enable Password window
Description
If a password was previously configured for this entry, enter it here in order to change
it to a new password.
Enter the new password that you wish to set on the Switch to authenticate users
attempting to access Administrator Level privileges on the Switch. The user may set a
password of up to 16 characters.
Confirm the new password entered above. Entering a different password here from
the one set in the New Local Enabled field will result in a fail message.
186