D-Link DGS-3312SR Release 3.5 Manual page 131

To create a new route redistribution criteria, select the Dest Protocol (destination protocol) and Src Protocol (source
protocol) from the drop-down menus, choose the metric Type and enter a Metric value. Click on the Add/Modify button
and the new redistribution setting appears listed in the table. To eliminate an existing redistribution configuration, click the
X in the Delete column for the configuration being removed.
Refer to the table below for descriptions of the Router Redistribution Settings window settings:
Parameter
Dest Protocol
Src Protocol
Type
Metric
DGS-3312SR Stackable Gigabit Layer 3 Switch
Description
Allows the selection of the protocol of the destination device. Available choices are
RIP and OSPF.
Allows the selection of the protocol of the source device. Available choices are RIP,
OSPF, STATIC, or LOCAL.
Allows for the selection of one of six methods of calculating the metric value. The user
may choose between All, Internal, External, ExtType1, ExtType2, Inter-E1, Inter-E2.
See the table above for available metric value types for each source protocol.
Allows the entry of an interface cost. This is analogous to a Hop Count in the RIP
routing protocol. The user may specify a cost between 0 and 16.
118