Snmp User Table - D-Link DGS-3312SR Release 3.5 Manual

SNMP User Table

The SNMP User Table displays all of the SNMP User's currently configured on the Switch.
Open the Management folder and then the SNMP Manager folder. Finally, click on the SNMP User Table link. This
will open the SNMP User Table, as shown below.
To delete an existing SNMP User Table entry, click on the X icon below the Delete heading corresponding to the entry you
want to delete.
SNMP User Table Display
To display the detailed entry for a given user, click on the blue hyperlinked User Name. This will open the SNMP User
Table Display window, as shown below.
The following parameters are displayed:
Parameter
User Name
Group Name
SNMP Version
Auth-Protocol
Priv-Protocol
DGS-3312SR Stackable Gigabit Layer 3 Switch
Figure 7- 5. SNMP User Table window
Figure 7- 6. SNMP User Table Display window
Description
An alphanumeric string of up to 32 characters. This is used to identify the SNMP
users.
This name is used to specify the SNMP group created can request SNMP messages.
V1 - Indicates that SNMP version 1 is in use.
V2 - Indicates that SNMP version 2 is in use.
V3 - Indicates that SNMP version 3 is in use.
None - Indicates that no authorization protocol is in use.
MD5 - Indicates that the HMAC-MD5-96 authentication level will be used.
SHA - Indicates that the HMAC-SHA authentication protocol will be used.
None - Indicates that no authorization protocol is in use.
DES - Indicates that DES 56-bit encryption is in use based on the CBC-DES (DES-
56) standard.
191