Snmp Group Table - D-Link DGS-3312SR Release 3.5 Manual

DGS-3312SR Stackable Gigabit Layer 3 Switch

SNMP Group Table

An SNMP Group created with this table maps SNMP users (identified in the SNMP User Table) to the views created in the
previous menu. To view the SNMP Group Table, open the SNMP Manager folder, located in the Management folder,
and click the SNMP Group Table entry. The following screen should appear:
Figure 7- 10. SNMP Group Table window
To delete an existing SNMP Group Table entry, click the corresponding X icon under the Delete heading.
To display the current settings for an existing SNMP Group Table entry, click the blue hyperlink for the entry under the
Group Name heading, revealing the following window.
Figure 7- 11. SNMP Group Table Display window
To add a new entry to the Switch's SNMP Group Table, click the Add button in the upper left-hand corner of the SNMP
Group Table window. This will open the SNMP Group Table Configuration window, as shown below.
194