Snmp View Table - D-Link DGS-3312SR Release 3.5 Manual

SNMP View Table

The SNMP View Table is used to assign views to community strings that define which MIB objects can be accessed by a
remote SNMP manager. To view the SNMP View Table, open the SNMP Manager folder, located in the Management
folder, and click the SNMP View Table entry. The following screen should appear:
To delete an existing SNMP View Table entry, click the X button listed under Delete on the far left that corresponds to
View Name. To create a new entry, click the Add button, a separate window will appear.
The SNMP Group created with this table maps SNMP users (identified in the SNMP User Table window) to the views
created in the previous window.
The following parameters can set:
Parameter
View Name
Subtree OID
View Type
DGS-3312SR Stackable Gigabit Layer 3 Switch
Figure 7- 8. SNMP View Table window
Figure 7- 9. SNMP View Table Configuration window
Description
Type an alphanumeric string of up to 32 characters. This is used to identify the new
SNMP view being created.
Type the Object Identifier (OID) Subtree for the view. The OID identifies an object tree
(MIB tree) that will be included or excluded from access by an SNMP manager.
Select Included to include this object in the list of objects that an SNMP manager can
access. Select Excluded to exclude this object from the list of objects that an SNMP
manager can access.
193