D-Link DGS-3312SR Release 3.5 Manual page 198

To define an Enable Login Method List, set the following parameters and click Apply:
Parameter
Method List Name
Method 1, 2, 3, 4
DGS-3312SR Stackable Gigabit Layer 3 Switch
Figure 6- 20. Enable Method List – Edit window
Description
Enter a method list name defined by the user of up to 15 characters.
The user may add one, or a combination of up to four of the following authentication
methods to this method list:
local_enable - Adding this parameter will require the user to be authenticated using
the local enable password database on the Switch. The local enable password must
be set by the user in the next section, entitled Local Enable Password.
none – Adding this parameter will require no authentication to access the Switch.
radius - Adding this parameter will require the user to be authenticated using the
RADIUS protocol from a remote RADIUS server.
tacacs – Adding this parameter will require the user to be authenticated using the
TACACS protocol from a remote TACACS server.
tacacs+ – Adding this parameter will require the user to be authenticated using the
TACACS+ protocol from a remote TACACS+ server.
xtacacs – Adding this parameter will require the user to be authenticated using the
XTACACS protocol from a remote XTACACS server.
185