DES-3326SR Layer 3 Fast Ethernet Switch User's Guide
Once the switch configuration settings have been saved to NV-
RAM, they become the default settings for the switch. These
settings will be used every time the switch is rebooted.
Factory Reset
The following menu is used to restart the switch using only the
configuration that was supplied by the factory. A factory reset
returns all configuration options to their default values and
restores the switch's configuration to the factory settings.
All user-entered configuration information will be lost.
Figure 6 - 6. Factory Reset Screen
Click Yes if you want the switch to retain its current IP
address. Click No to reset the switch's IP address to the factory
default, 10.90.90.90 (with a Subnet Mask of 255.0.0.0 and
Default Gateway 0.0.0.0)
Click the Apply button to restart the switch.
152