Security Ip Management Stations Configuration; User Account Management - D-Link DGS-3312SR Release 3.5 Manual

Security IP Management Stations Configuration

Use the Security IP Management window to define up to four community strings. Community strings are used to verify
who can receive SNMP information from the Switch.
To access the Security IP Management window, click Trusted Host in the Security folder.
Use the Security IP Management window to select up to three management stations used to manage the Switch. If you
choose to define one or more designated management stations, only the chosen stations, as defined by IP address, will be
allowed management privilege through the web manager or Telnet session. To define a management station IP setting, type
in the IP address in the area provided and then click the Apply button.

User Account Management

Use the User Account Management to control user privileges. To view existing User Accounts, open the Management
folder and click on the User Accounts link. This will open the User Account Management window, as shown below.
To add a user account, click the Add button revealing the following window to configure.
Add a new user by typing in a User Name, New Password and retype the same password in the Confirm New Password.
Choose the level of privilege (Admin or User) from the Access Right drop-down menu.
DGS-3312SR Stackable Gigabit Layer 3 Switch
Figure 3-4. Security IP Management window
Figure 3- 5. User Account Management window
Figure 3-6. User Account Management window
28