Digital video recorder with 8 security cameras (23 pages)
Summary of Contents for Watchguard WGSIR-900
Page 1
Model: WGSIR-900 This professional security siren features a high power acoustic siren, strobe light and a back- up battery. Compatible with Watchguard™ WGAP864 and most other alarm panels. Product Features • Dual tamper switch protection for outer casing & wall mount removal •...
Page 2
Specifications Dimensions 337 x 215 x 75mm Power Consumption 20mA @ 12VDC Backup Battery 12V 1.2A rechargeable Siren Current 220mA @ 12VDC Flash Current 180mA @ 12VDC Timers 1min. (Test) / 3min. / 6min. Tamper Trigger Interior/Exterior Operating Environment -35° to 70°C Material Plastic ABS Water resistant with UV protection (IP65)
Page 3
Installation 1. Choose the mounting location for the siren - the wall must be even and not have any holes or protrusions. 2. Open the siren housing and mount it to the wall with the 3 included screws. 3. Connect the wires to the terminal (refer to Wiring Diagram) and plug the terminal to your drive board.
Page 4
Wiring To connect the siren unit to the alarm panel, follow the wiring diagram below: 1. AUX output from the alarm panel connects to DC-12V port on the siren unit 2. SIREN output from the alarm panel connects to SN port on the siren unit 3.