Auto Tray Switch Feature; Order For Selecting Paper Trays - Konica Minolta magicolor 8650 User Manual

2
2.3.6

Auto tray switch feature

If the selected paper tray runs out of paper while a job is being printed and a different paper tray is loaded
with paper meeting the following conditions, the other paper tray is automatically selected so printing can
continue. If the optional tray 4 (LCT) is installed, a maximum of 3,650 copies (with Letter v (A4 v) paper) can
be made continuously. (The paper tray is automatically switched only if the "Auto Tray Switch" parameter in
the "User Settings" menu is set to "ON".)
Operating conditions
- The paper is the same size.
- The paper is positioned in the same orientation.
- The paper is the same type.
- The paper trays are selected when the paper tray is automatically switched.
!
Detail
For details on the specifying the paper trays that are selected when the paper tray is automatically
switched, refer to "System Settings" on page 9-18.
2.3.7

Order for selecting paper trays

As a factory default, when a different paper tray is automatically selected, the next paper tray in the following
list is chosen.
When the standard tray is installed:
T2 (Tray 2) % T3 (Tray 3) % T1 (Tray 1 (bypass tray))
When single paper feed cabinet is installed:
T2 (Tray 2) % T3 (Tray 3) % T4 (Tray 4) % T1 (Tray 1 (bypass tray))
When double paper feed cabinet is installed:
T2 (Tray 2) % T3 (Tray 3) % T4 (Tray 4) % T5 (Tray 5) % T1 (Tray 1 (bypass tray))
When tray 4 (LCT) is installed:
T2 (Tray 2) % T3 (Tray 3) % T4 (Tray 4) % T1 (Tray 1 (bypass tray))
!
Detail
To change the order in which the paper trays are selected, refer to "System Settings" on page 9-18.
2-24 EDNord - Istedgade 37A - 900 Aalborg - telefon 9633 3500
Before using the machine
magicolor 8650