Printer Driver Installation By Searching Printers Using The Add Printer Wizard - Konica Minolta magicolor 8650 User Manual

4

Printer driver installation by searching printers using the Add Printer Wizard

Note
When installing on Windows Vista, administrator permissions are required.
Printers will be found during installation. Connect this machine to the network, and then turn on the
power.
1
Insert the printer driver CD-ROM into the CD-ROM drive of the computer.
2
Click the [Start] button, and then click "Control Panel".
3
From "Hardware and Sound", click "Printer".
– If Control Panel is displayed with Classic View, double-click "Printers".
The Printers window appears.
4
Click "Add a printer" from the toolbar.
The Add Printer window appears.
5
Click "Add a network, wireless or Bluetooth printer".
– If the printer is not detected, turn off this machine, then on again.
– When turning off the power, then on again, wait at least 10 seconds before turning it on again.
Otherwise, this machine may not function properly.
The connected printers are detected.
6
Select this machine from the list, and then click the [Next] button.
– When using the LPR/Port9100 protocol, select the printer having its IP address.
– When using an SMB connection, select the printer having its "\\NetBIOS name\print service name".
– It may take some time to finish searching the entire list of printers.
7
Click the [Have Disk] button.
8
Click the [Browse] button.
9
Specify the desired folder on the CD-ROM that contains the printer driver, and then click the [Open]
button.
– Select the specified folder according to the printer driver to be used, the operating system, and the
language. Printer drivers that can be selected: Windows Vista: PCL driver, PS driver
10
Click the [OK] button.
The "Printer" list appears.
11
Click the [Next] button.
12
Follow the on-screen instructions.
– If the "User Account Control" window appears, click the [Continue] button.
– If the Verify the publisher dialog box of Windows Security appears, click "Install this driver software
anyway".
13
Click the [Finish] button.
14
When the installation is completed, make sure that the icon of the installed printer appears in the
Printers window.
15
Remove the CD-ROM from the CD-ROM drive.
This completes the printer driver installation.
4-14 EDNord - Istedgade 37A - 900 Aalborg - telefon 9633 3500
Installing the printer driver for Windows
magicolor 8650