Konica Minolta magicolor 8650 User Manual page 514

Authentication unit (Biometric type AU-101)
Condition
The Add New Hardware Wizard
starts when this device is connected
to the computer.
If the problem is not corrected after the described operation is performed, contact your technical
representative or the manufacturer.
magicolor 8650
Possible cause
Is this device connected to the same
USB port used when the driver was
installed?
EDNord - Istedgade 37A - 900 Aalborg - telefon 9633 3500
Remedy
If this device is connected to a USB
port different from the one used when
the driver was installed, the Add New
Hardware Wizard may start. Use the
same USB port used when the driver
was installed.
15
15-21