18
18.4
Tray Mapping Setting
The actual paper source mapping against the value specified by the paper tray command included in the PCL
command can be changed.
This machine uses the following HP-compatible commands when specifying the paper tray.
-
PCL5: "PAPER SOURCE" command
-
PCL XL: "MEDIA SOURCE" command
18.4.1
Tray mapping setting procedure
Briefly, setting procedure for tray mapping is as follows.
1
Create a tray mapping definition PRN file.
2
Send the tray mapping definition PRN file to the MFP.
3
Turn off the power of this machine, then on again, and check the operation.
Note
This function is available only if the optional HDD is installed.
18.4.2
Creating tray mapping definition PRN file
1
Create a text file that includes the mapping information for each tray.
2
Use a text editor such as Notepad to create the following contents.
3
After completion, save the file with any desired file name.
Format
18-10
EDNord - Istedgade 37A - 900 Aalborg - telefon 9633 3500
Common parts requiring no modification
.....(1)
Change this part
.....(2)
Appendix
magicolor 8650