Printing On A Machine With The User Authentication Set Up - Konica Minolta magicolor 8650 User Manual

8
8.6

Printing on a machine with the user authentication set up

When the user authentication function has been specified on the machine, a user name and password must
be entered when printing.
Reminder
To use the user authentication, "User Auth/Account Track" must be specified and user must be
registered in advance. For details, refer to "Limiting users using this machine (Machine authentication)"
on page 10-34.
If a print job is sent using a user name or password that is not valid for "Authentication Mode" on the
machine, or if a job is sent without setting up "User Authentication", the operation is not authenticated
by the machine and the job is canceled.
If the user authentication function is set up on the machine and the "ProhibitFunctions" in [Admin.
Settings]-[Security Details] is set to mode 2, the relevant user is locked and access may be blocked if
the authentication information is not entered correctly.
The following three printer drivers support setup of this feature:
Konica Minolta PCL Printer Driver for Windows
Konica Minolta PostScript Printer Driver for Windows
PostScript PPD Printer Driver for Mac OS X
Note
If printing is not allowed, printing cannot be performed even when used by a registered user. For details
on the user authentication details, consult the administrator of this machine.
If performing user authentication with an optional authentication unit, enter the user name and
password. For details, refer to "Touch and Print" on page 8-32.
8-24 EDNord - Istedgade 37A - 900 Aalborg - telefon 9633 3500
Function detail description
magicolor 8650