Setup - Konica Minolta magicolor 8650 User Manual

Authentication unit (IC card type AU-201)

Setup

1
Turn off the machine with the power switch, and then disconnect this device from the machine.
2
Install IC Card Driver (USB-Driver).
Plug the cable from this device into the USB port on the computer.
The Found New Hardware Wizard starts.
3
Select "Yes, now and every time I connect a device", and then click [Next].
4
Insert the application CD-ROM included with this device into the CD-ROM drive of the computer.
5
Select "Install from a list or specific location (Advanced)", and then click [Next].
6
Select the "Include this location in the search" check box, check that the application CD-ROM appears
as a location to be searched, and then click [Next].
– If the application CD-ROM does not appear as a location to be searched for the driver, click
[Browse], select the IC Card Driver (USB-Driver) folder on the CD-ROM, and then click [OK].
The installation begins.
7
Click [Finish].
The installation of IC Card Driver (USB-Driver) is completed.
8
Install PageScope Data Administrator IC Card Plugin.
Open the IC_Card_Plugin folder on the application CD-ROM, and then click "setup.exe".
9
Select the language, and then click [OK].
The installer starts up.
10
Follow the instructions that appear on the screen to complete the installation.
11
Click [Next].
12
Select "I accept the terms of the license agreement", and then click [Next].
13
Click [Install].
14
Click [Finish].
Data Administrator IC Card Plugin is installed, and the setup is completed.
magicolor 8650 EDNord - Istedgade 37A - 900 Aalborg - telefon 9633 3500
16
16-9