Konica Minolta magicolor 8650 User Manual page 439

11
10
Open the right-side door, and then remove any misfed paper
in the transport section.
11
If the paper could not be removed in step 10, turn the misfeed-
clearing dial in the folding section clockwise.
Feed the paper into the output tray 2, and then remove it.
12
Close the front door of the finisher.
13
Slide the finisher back against the machine.
Reminder
If the message "Misfeed detected." appears, be sure to open the front door, turn the misfeed-clearing
dial until the removal indicator is completely blue, and then remove the paper. If the paper is removed
with too much force, the finisher may be damaged.
Do not remove paper remaining in the transfer unit with too much force, otherwise the folding unit may
be damaged.
Be careful that your fingers are not pinched when the front door is closed.
11-40 EDNord - Istedgade 37A - 900 Aalborg - telefon 9633 3500
Troubleshooting
Misfeed-
clearing dial in
the folding
section
magicolor 8650