Konica Minolta magicolor 8650 User Manual page 285

9
6
Access this machine, which is specified as the FTP server, and login.
– If you use the Internet Explorer ver.6, you can login as follows.
In the "Address" bar, enter "ftp://<IP address of this machine>".
Select "Login As" from the "File" menu.
Enter User name and Password, and then click Log On.
– User name: update
Password: update
7
Transfer the update file to the FTP server that you accessed.
– You can start data transfer by moving the provided update file onto the FTP screen using drag-and-
drop.
After data transfer, operate the control panel of this machine.
8
Press the [Menu/Select] key on the control panel of this machine.
Data download begins.
9
When downloading is completed, reboot this machine.
Updating is completed when the machine is rebooted.
10
After rebooted, press the [Menu/Select] key.
The machine is ready for use.
Note
If the [Firmware Update] is failed, the "Failed" message appears. Press the [Menu/Select] key, resume
the previous version firm, and then execute the [Firmware Update] again.
9-32 EDNord - Istedgade 37A - 900 Aalborg - telefon 9633 3500
Settings for control panel
magicolor 8650