Specifying Smb Print Settings; Tcp/Ip Settings - Konica Minolta magicolor 8650 User Manual

3
3.4.2

Specifying SMB print settings

Specify settings for printing by using SMB.
The printer is sharable on the Windows network by using the SMB protocol. SMB printing is performed by
directly specifying this machine on the Windows network from the computer.
To specify a computer on another network using Windows name (NetBIOS name), a WINS server must be
used.
This machine supports the direct hosting service. To use SMB printing in the IPv6 environment, the Direct
Hosting setting must be enabled.
% Specify the settings according to the following flowchart.
Use the WINS server?
WINS Setting
Note
For details on installing the printer driver, refer to "Installing the printer driver for Windows" on page 4-3.

TCP/IP Settings

Specify settings to use this machine in a TCP/IP network environment.
For details, refer to "Specifying general settings for TCP/IP-based communication" on page 3-3.
3-10
No
Yes No
EDNord - Istedgade 37A - 900 Aalborg - telefon 9633 3500
TCP/IP Settings
Print Setting
IPv6 environment?
Finish
Network settings
Yes
Direct Hosting Setting
magicolor 8650