Troubleshooting
11.4
When the message "Replenish paper" appears
If a tray has run out of paper during printing, the message "Replenish paper" appears.
!
Detail
For details on loading paper, refer to "Loading paper into tray 2/3/4/5" on page 2-29, and "Loading
paper into the tray 4 (LCT)" on page 2-30, and "Loading paper into the tray 1 (bypass tray)" on
page 2-25.
11.5
When the message "Memory Overflow" appears
This message appears when memory space is not sufficient and the job being read was deleted.
Check the size of the data to be sent.
11.6
When the message "Replace XXXX soon." appears
When it is almost time to replace consumables or a part within this machine, a message similar to the one
shown below appears, warning about the replacement period.
!
Detail
When the message appears, replace the specified consumables or part.
After the message "Replace XXXX soon." appears, the message "Please replace XXXX." appears and
the machine stops operating.
The number of pages that can be printed after the message "Replace XXXX soon." appears and before
the message "Please replace XXXX." appears differs depending on the printing conditions, the
consumables and the part to be replaced.
magicolor 8650
EDNord - Istedgade 37A - 900 Aalborg - telefon 9633 3500
11
11-47