Before using the machine
2.4.2
Loading paper into tray 2/3/4/5
The paper loading method is the same for trays 2, 3, 4 and 5.
The following describes the paper loading procedure for tray 2.
0
Tray 4/5 is an option.
1
Pull out tray 2.
2
Slide the lateral guides to fit the size of paper to be loaded.
–
If the lateral guides are not positioned correctly for the
loaded paper, the paper size will not be correctly detected.
Be sure to adjust the lateral guides to the size of the loaded
paper.
3
Load the paper into the tray so that the side of the paper to be
printed on (the side facing up when the package was
unwrapped) faces up.
–
Load letterhead paper so that the side to be printed on faces down.
magicolor 8650
EDNord - Istedgade 37A - 900 Aalborg - telefon 9633 3500
Film
Lateral guides
, mark
2
2-29