Table of Contents
Advertisement
Table 4-4
SIP Configuration
Field
Explanation
UDP only: To be selected if SIP signalling is
sent through UDP, and only simple DNS is
used for resolving IP addresses.
Transport
DNS SRV: To be selected if SIP signalling is
sent through UDP, and DNS SRV is used for
resolving IP addresses.
Enter the name of the domain.
Note: If no user specific domain is configured,
Default
the handsets registered on the KWS300 will use
Domain
the default domain as the domain part of the
SIP URI; e.g. John Doe
<sip:1234@somecompany.com
'Enter SIP proxy.
Note: The proxy is the SIP URI of the
Proxy
SIP-proxy. The KWS300 will route all outgoing
SIP signalling to the proxy, e.g. SIP
registrations and outgoing calls.
Enter the number of seconds before a SIP
Registra-
registration will be renewed. The default value
tion
is 3600
Expire
(sec)
Max
The maximum number of times SIP messages
Forwards
can be forwarded. The default value is 70.
Defines IP type of service used for SIP
SIP type
messages. The default setting is Nothing.
of
Service
Default
Default user name used for SIP authentication.
User
Enter password.
Note: If no handset specific authentication user
Default
name/password is configured, handsets
Password
registered on the KWS300 will use the default
user name/password for authentication.
Enable the check box (Real-Time Transport
Protocol), if you want the keypad signalling
Send as
sent as RTP packets with DTMF code.
RTP
Enable the check box, if you want the keypad
Send as
signalling sent as SIP INFO
SIP
Info
SIP Configuration - Authentication
SIP Configuration - DTMF Signalling
Configuring KIRK Wireless Server 300
Required Optional
x
x
x
x
x
x
x
x
x
x
4–8
Advertisement
Chapters
Table of Contents
