Kws300 - Reset Button; Resetting The Kws300 Hardware - Polycom KIRK 300 Installation And Configuration Manual

KWS300 - Reset Button

LED Indicator Description - Front Cover
Table 3-2
LED Indicator
Steady green
Slow green flashing
Fast red flashing
Steady red
Steady red for 5 seconds
followed by fast red flashing
LED Indicator Description - Faceplate
Table 3-3
LED Indicator
LINK/Activity Indicator - green
LINK/Activity Indicator - green
flashing
It is possible to restart or reset the KWS300 by pressing the Reset button on the
faceplate of the KWS300.

Resetting the KWS300 Hardware

This section contains a description of the different actions that take place when
pressing the Reset button.
Reset Button Description
Table 3-4
Press button
Short press (2 to 5 sec.)
Long press (5 to 9 sec.)
until front LED flashes
red, then release button
Meaning
OK and idle
OK and active voice call
Error
Reset/shutdown in progress
Reset to factory settings
Meaning
Link layer software has established
connection
Activity
Action
System restarts when button is released.
Resets the system to factory default settings (original
IP settings and empty user data base) and restarts the
system.
Firmware version is not affected.
Installing KIRK Wireless Server 300
3–4