Table of Contents
Advertisement
Table 5-1
Configuring KIRK Handsets
Field
Explanation
Enter the authentication code (AC).
The authentication code is a subscription
password of a maximum of eight digits,
Access
defined by the technicians, and can be used
Code
when connecting the handset to a KWS300.
The authentication code is a subscription
pin code for the individual handset.
Enter a text to be displayed when the
Standby
text
handset is on hook.
Enter the user part of a SIP URI, e.g. 1234
Username
in John Doe<sip: 1234@somecompany.com
Enter the domain part of a SIP URI, e.g.
somecompany.com in John
Doe<sip:1234@somecompany.com
Domain
Note: If not configured, the default
domain will be used.
Enter the name to be displayed (caller ID),
Display
e.g. John Doe in John Doe
name
<sip:1234@somecompany.com
Enter user name.
Authen-
The user name will override the Default
tication
user
User field under SIP Configuration.
Enter a password.
Authenti-
The password will override the Default
cation
password
Password field under SIP Configuration.
Enter local number of the handset.
Entering a local number makes it possible
Local
to send an MSF to the subscribed handset.
Number
Note: Required for receiving MWI.
Click Save to save the registration(s).
For information on how to subscribe the KIRK Handsets, please refer to the
handset user guides at www.polycom.com.
User page - SIP
User Page - MSF
KIRK Handset Registration
Required Optional
x
x
x
x
x
x
x
x
5–3
Advertisement
Chapters
Table of Contents
