Table of Contents
Advertisement
From the Display filter list you can select between emergency, critical,
2
error, warning, notice, info or debug depending on the logs you want to
see.
Click Save if you want to save the logs in a file.
3
Wireless Server Information
This page provides information about the firmware version and ARI code of
the KWS300.
1
Click Status, and then click Wireless Server.
Figure 7-3
Adm. Page KWS300: Status/WS page
Packet Capture
The Packet Capture page is used to create traces in PCAP format for
debugging. These traces can be viewed with the Wireshark program
(www.wireshark.org).
1
Click Status, and then click Packet Capture.
Figure 7-4
Adm Page KWS300: Status/Packet Capture page
Table 7-1
Packet Capture
Field
Explanation
Enable this check box to capture SIP
Capture
SIP
signalling.
Packet Capture - Filters
System Management
Required Optional
x
7–3
Advertisement
Chapters
Table of Contents
