Table of Contents
Advertisement
4. Specify the certificate you used for signing the CSR is specified as a CA certificate
5. Apply the changes.
Generate Test Certificate
If needed, you can generate a self-signed certificate and private key for testing purposes. After
providing the requested information, the certificate and key are generated immediately.
1. Specify an unused certificate number.
2. Provide the requested information.
User Guide
In the preceding example, the newly signed certificate is saved as certificate number
3. Use the export command to export the signed certificate to a file. The signed
CSR can then be installed on the backend web server as a server certificate.
on the virtual SSL server.
cfg/ssl/server #/adv/sslconnect/verify/cacerts
>> Main#
""
Current value:
Enter certificate numbers (separated by comma):
The CSR is signed using the private key associated with the currently selected
certificate.
If a certificate and key already exist for the current certificate index number, they
are overwritten when you execute the apply command. You should therefore
always choose an unused certificate index number before creating a test
certificate.
cfg/cert 4
>> Main#
Creating Certificate 4
test
>> Certificate 4#
For a more detailed explanation of the requested information, see
Submitting a CSR Using the CLI
The combined length of the following parameters may not exceed 225
bytes.
Country Name (2 letter code):
State or Province Name (full name):
Locality Name (eg, city):
Organization Name (eg, company):
Organizational Unit Name (eg, section):
Common Name (eg, your name or your server's hostname):
1
on page 87.
Generate Test Certificate
Generating and
April 2013
117
Advertisement
Table of Contents
