Table of Contents
Advertisement
4. Apply your changes.
>> Certificate 1#
Changes applied successfully.
Your certificate and private key is now fully installed and ready to be taken into
use.
If the AVG software is used for SSL acceleration purposes, the certificate should
be mapped to the virtual SSL server, using the /cfg/ssl/server #/ssl/
cert command.
If the AVG software is used for deployment of a VPN solution, the certificate should
be mapped to the portal server of the desired VPN, using the /cfg/vpn #/
server/ssl /cert command.
User Guide
apply
Adding Certificates to the AVG
April 2013
97
Advertisement
Table of Contents
