Table of Contents
Advertisement
5. Add your private key (if in a separate file).
6. Apply your changes.
User Guide
Log in to the FTP server with your user name and password. For anonymous mode,
the following string is used as the password (for logging purposes):
admin@hostname/IP.isd.
You may also be prompted for a password phrase (if specified when creating or
exporting the private key)
FTP User (anonymous):<username or press ENTER for anonymous mode>
Password:<password or press ENTER for default password in
anonymous mode>
received 2392 bytes
Enter pass phrase:
Provided the operation was successful and the certificate file includes your private
key, your screen output should resemble the following example:
Key added.
Certificate added.
Use 'apply' to activate changes.
This step is only required if the certificate file does not include the private key. You
may be prompted for a password phrase (if specified when creating or exporting
the private key).
import
>> Certificate 1#
Select protocol (tftp/ftp/scp/sftp) [tftp]:
Enter host name or IP address of server:<server host name or IP
address>
Enter filename on server:<filename.key>
Retrieving VIP_1.key from 192.168.128.58
FTP User (anonymous):<username or press ENTER for anonymous mode>
Password:<password or press ENTER for default password in
anonymous mode>
received 392 bytes
Enter pass phrase:
Key added.
Use 'apply' to activate changes.
Adding Certificates to the AVG
ftp
April 2013
99
Advertisement
Table of Contents
