Establishing A Telnet Connection - Avaya VPN Gateway User Manual

Vpn gateway
Table of Contents

Advertisement

The Command Line Interface
Table 3: Console Configuration Parameters
Baud Rate
Data Bits
Parity
Stop Bits
Flow Control
• A serial cable with a female DB-9 connector. (For more specific information, see the
"Connecting to the VPN Gateway " chapter in the Hardware Installation Guide.)
Procedure
1. Connect the terminal to the Console port using the correct serial cable.
2. Power on the terminal.
3. To establish the connection, press ENTER on your terminal.

Establishing a Telnet Connection

A Telnet connection offers the convenience of accessing the AVG cluster from any workstation
connected to the network. Telnet access provides the same options for user access and
administrator access as those available through the console port.
To configure the AVG cluster for Telnet access, you need to have a device with Telnet client
software located on the same network as the VPN Gateway(s). The VPN Gateway must have
an IP address and a Management IP address. If you have already performed the initial setup
by selecting new or join in the Setup menu, the assignment of IP addresses is complete.
When making configuration changes to a cluster of AVGs through Telnet, it is recommended
that you connect to the IP address of the MIP. However, if you want to halt or reboot a particular
VPN Gateway in a cluster, or reset all configuration to the factory default settings, you must
connect to the IP address of the particular VPN Gateway. This also applies when using an
SSH connection instead of a Telnet connection. To view the IP addresses of all VPN Gateways
in a cluster, use the /info/isdlist command.
124
User Guide
Parameter
When connecting to a VPN Gateway, use a serial cable with a female DB-9
connector (shipped with the VPN Gateway).
You will next be required to log in by entering a user name and a password. For
more information about user accounts and default passwords, see
AVG Cluster
on page 126.
Comments? infodev@avaya.com
Value
9600
8
None
1
None
Accessing the
April 2013

Advertisement

Table of Contents
loading

This manual is also suitable for:

3050-vmAvg 3050-vm3070-vmAvg 3070-vm3090-vmAvg 3090-vm

Table of Contents