Displaying The Picture Recording Capacity - Leica MC-UL427 Instructions Manual

Displaying the picture recording capacity

While the camera is accessing the card or the built-in memory (for an operation such as
picture writing, reading, deletion, or formatting), do not turn off the camera or remove
the battery, the card, or disconnect the charger. Do not subject the camera to vibrations,
impact, or static electricity.
The card or the data on the card may be damaged, and the camera may no longer
operate normally.
If an operation fails due to vibration, impact or static electricity, perform it again.
Picture save destination (memory card / built-in memory)
Estimated remaining pictures or recording time capacity
(press [DISP.] button to switch display)
Displayed when no card is inserted
(pictures will be saved to built-in memory)
- 21 -