[Economy]; [Auto Review] - Leica MC-UL427 Instructions Manual

• For details about the setting procedure in the [Setup] menu (→51)
Item

[Economy]

For turning off the power
or the monitor while
not using the camera
to minimize battery
consumption.

[Auto Review]

For having still pictures
displayed immediately
after taking them.
[Sleep Mode]
[2MIN.] / [5MIN.] / [10MIN.] / [OFF]:
Automatically switches the camera off when it is not being
used.
• To restore → Press the shutter release button halfway, or
turn on the power again.
• Cannot be used in the following cases:
When connected to a computer/printer, during motion
picture recording/playback, during Slide Shows
• Settings are fixed to [5MIN.] in [Snapshot Mode].
[LCD Power Save]
[ON] / [OFF]:
The monitor is turned off to minimize power consumption.
• This reduces the picture quality of the monitor image
during recording to minimize battery consumption
(except for the Digital Zoom area). Note, however, that
there is no effect on the recorded picture.
• The setting in [LCD Mode] is prioritized over the setting
in [LCD Power Save] for the brightness of the monitor.
[1SEC] / [2SEC]
[HOLD]: The auto review screen remains until a button
(other than the [DISP.] button) is pressed
[OFF]
• The following cases are fixed to the settings indicated
below.
[Snapshot Mode]: [2SEC]
Scene Mode [Panorama Shot]: [2SEC]
• Still pictures are automatically displayed immediately
after they are taken regardless of the [Auto Review]
setting in [Auto Bracket], [Burst] mode, and [Handheld
Night Shot] and [HDR] Scene Modes.
• Motion pictures cannot be reviewed automatically.
- 57 -
Using the [Setup] menu
Settings, notes