Leica MC-UL427 Instructions Manual page 179

Recording (continued)
Motion picture recording stops midway.
●
With camera models 18 176 / 18 177
If [Rec Quality] of [AVCHD] motion pictures is set to [GPH], [PSH], [GFS] or [FSH], you can
continuously record a motion picture for up to 29 minutes . (→107)
You can continuously record a motion picture in [MP4] for up to 29 minutes or approx. 4 GB.
(In this case, you can continuously record a motion picture in [FHD] for up to approx. 27 minutes
12 seconds.)
With camera model 18 175
Motion pictures can be recorded continuously for up to 29 minutes. Also, motion picture recorded
continuously in [MP4] is up to 4 GB. (In this case, you can continuously record a motion picture in
[FHD] for up to approx. 27 minutes 12 seconds.)
●
If the surrounding temperature is high, or a motion picture is recorded continuously,
and recording may be stopped halfway through to protect the camera. (Only when [Rec Quality] is
set to [GPH], [PSH], [GFS] or [FSH])
●
With some cards, the access display may appear briefly after recording, and recording may end
midway.
●
If recording stops even when using a card of the recommended speed class (→20), the data writing
speed has dropped. If this happens, we recommend backing up the data on the memory card and
formatting it (→60).
Panorama picture recording stops before finishing.
●
If the pan motion of the camera is too slow, the camera assumes that the operation has been
aborted and stops recording.
●
If the pan motion of the camera is too shaky when it is moved in the recording direction, the camera
stops recording.
→ To record panorama pictures, pan the camera in a small circular motion parallel to the recording
direction at a speed of approx. 8 seconds per revolution (guideline).
The subject cannot be locked. (AF tracking fails)
●
If the color of the subject is similar to that of its background, AF Tracking may not function. Set the
AF area to those colors specific to the subject by aiming the AF frame at that area.
Monitor
The display brightness changes.
●
The aperture value is set while the shutter release button is pressed halfway. (This does not affect
recorded picture.)
This symptom may also occur when the brightness changes because the zoom is operated or the
camera is moved. This is the automatic aperture operation of the camera and is not a malfunction.
The monitor image flickers indoors.
●
The monitor may flicker for a few seconds after turning it on. This is an operation to correct flicker
caused by lighting such as fluorescent lights, LED lights etc. and is not a malfunction.
The monitor image is too bright/too dark.
●
[LCD Mode] is activated (→55)
●
Use [LCD Display] to adjust the brightness of the monitor. (→55)
Black/blue/red/green dots or interference appears. The monitor image looks distorted
when touched.
●
This is not a fault, and will not be recorded on the actual pictures.
- 179 -
Q&A Troubleshooting
is displayed