Leica MC-UL427 Instructions Manual page 183

Others
The menu is not displayed in the desired language.
●
Change the [Language] setting (→61).
The camera rattles if shaken.
●
This sound is made by the lens movement and is not a fault.
The red lamp is illuminated when pressing the shutter release button halfway in dark
locations.
●
[AF Assist Lamp] is set to [ON] (→103).
The AF Assist Lamp is not illuminated.
●
[AF Assist Lamp] is set to [OFF] (→103).
●
The lamp is not switched on in bright locations.
The camera is hot.
●
The camera may become a little warm during use, but this does not affect performance or quality.
The lens makes a clicking noise.
●
When the brightness changes, the lens may make a clicking noise and the monitor brightness may
also change, but this is due to aperture settings being made.
(This does not affect recording.)
The displayed time is incorrect.
●
The camera has not been used for a long time.
→ Reset the clock (→24).
●
A long time was taken to set the clock (clock will be behind by the same lapse of time).
Zooming stops momentarily.
●
The zoom movement stops momentarily during Extra Optical Zoom operation, but this is not a
malfunction.
The lens does not allow setting the longest focal length/the maximum zoom ratio.
●
If the zoom ratio stops at 3 x, [Macro Zoom] has been set. (→69)
The file numbers are not recorded in sequence.
●
File numbers are reset when new folders are created (→165).
The file numbers have jumped backwards.
●
The battery was removed/inserted with power on.
(Numbers may jump backwards if the folder/file numbers are not correctly recorded.)
- 183 -
Q&A Troubleshooting