Leica MC-UL427 Instructions Manual page 181

Playback (continued)
Red parts are rendered black in the recorded pictures.
●
When digital red-eye correction (
colored areas with red areas inside, the digital red-eye correction function may blacken the red
areas.
→ We recommend setting the flash to
recording.
Sounds of camera operations such as zooming are recorded in motion pictures.
●
Camera operation sounds may be recorded when the camera automatically adjusts the lens
aperture during motion picture recording; this is not a fault.
Motion pictures taken by this camera cannot be played back with other cameras.
●
When motion pictures recorded in [AVCHD], [MP4] or [High Speed Video] (Motion JPEG) are played
back, they may be displayed with poor picture quality or sound quality or may not be played back at
all even if an AVCHD, MP4 or Motion JPEG compatible device is used. Also, there might be a case
that a recording information does not display correctly.
TV, computer, printer
No image appears on TV. The image is blurred or not colored.
●
The devices are not connected correctly (→155).
●
The television has not been switched to auxiliary input.
●
Check the [Video Out] setting (NTSC/PAL) on the camera. (→59) (With camera model 18 175)
The display on the TV is different than that on the monitor.
●
The aspect ratio may be incorrect, or the edges may be cut off with certain televisions.
Cannot play motion pictures on TV.
●
The card is inserted into the TV.
→ Connect with the AV cable (included in scope of delivery) or the HDMI mini cable (available as
accessory →9) and play on camera (→155).
The picture is not displayed on the complete TV screen.
●
Check the [TV Aspect] settings (→59).
HDTV Link (HDMI) does not work.
●
Is the HDMI mini cable (available as accessory →9) connected correctly? (→155)
→ Check that the it is fully inserted.
●
Is the camera's [HDTV Link] setting set to [ON]? (→59)
→ The input setting may not be able to be changed automatically with certain television HDMI
sockets. In this case, please change the input setting with your television's remote control
(consult your television's instructions for details).
→ Check the HDTV Link (HDMI) settings on the device you are connecting to.
→ Turn the camera's power off and on again.
→ Turn the "HDTV Link control (HDMI device control)" setting on your television to off and then to
on again. (Consult your TV's instructions for details.)
Pictures cannot be sent to a computer.
●
The connection is not correct (→164).
●
Check whether the computer has recognized the camera.
→ Set [USB Mode] to [PC] (→58).
→ Switch the camera off and then back on again.
, ) is operating, if a subject is recorded that has skin-
, or , or [Red-Eye Removal] to [OFF] before
- 181 -
Q&A Troubleshooting